By the time I finished my tutorial, the last part had been completed.
But when I returned to the building site and started filling the cement blocks, I realized how much time had passed.
In fact, the blocks were so old that I couldn’t even put the blocks in the box that I bought at the store.
The concrete was so thick that it took me three tries to make a block.
I’m sure most of you have heard of the cement brick, or cement mortar.
Cement bricks are made by mixing up a mixture of cement and concrete.
They are used for concrete floors, for example.
While I had no idea how to make them myself, I found some online videos and some pictures that made it look easy.
The only thing I had to worry about was how the cement bricks would look once they were made.
After I made my first batch of cement bricks, I noticed a few things.
First, the cement had a very, very thick texture.
Second, it was quite hard to see what was inside.
I thought it would be difficult to remove them, so I decided to test that hypothesis by making a few smaller batches.
When I finally finished making all of my blocks, they looked very different.
The bricks were almost as thick as concrete.
Next, I started to use the cement to fill the concrete floors in the building.
When I first got the cement ready to go, I had some trouble filling the floors because the concrete was not strong enough to hold it in place.
But after a couple of tries, I got it.
After filling the concrete with cement, I was ready to get started.
This was the first time I ever used concrete floors to build a building.
Now that I know how to use cement, how do I make more cement bricks?
First, I’ll need to know how the concrete in the floor looks.
I took a look at the picture above and decided that the concrete that I was using looked more like a brick.
That means that the bricks that I made should be as similar as possible to the bricks I was already using.
That’s the first step, but I need to make more.
First I’ll use my hand to make the first layer of cement.
I’ll then cut it into the shape of a cube.
It took me about an hour to make my first concrete floor.
I didn’t need to do anything special to make this concrete.
The first thing that I did was just to make sure that the cubes were exactly the same size as the bricks in the concrete.
I used the same method to cut the cubes out, but it didn’t matter.
I just made sure that they were the same dimensions and I was good to go.
Once I got the cubes to the right size, I used my hand and a hammer to cut out the concrete base.
I was sure that I had the right material in the form of concrete blocks, so there was no need to worry.
As I said before, the concrete blocks are made up of two components.
First is the cement, and the second is the concrete mortar.
I use the mortar to form the concrete for the floor.
It’s important to note that the mortar in the cement is not actually cement itself.
Instead, it’s just a solid, thin layer of mortar that you can see in the picture below.
The mortar layer must be very small to be effective.
So when you start filling the floor with cement and mortar, you have to make your first layer very small.
First thing you have a lot of problems with is the size of the concrete itself.
It should be just as thin as a grain of sand.
I made a little mistake when I used a very large piece of cement, but after I got my hands on the bigger cement blocks I made, the mortar size got much smaller.
I got around this problem by using smaller chunks of cement in the mortar.
When you’re filling out the cement base, you need to add the cement mortar in a smaller quantity.
I did that by making sure that one of the cubes was about the size I was going to use for the base.
The cement cubes will need to be the same width as the concrete bricks that are already in the base of the building (or smaller if you’re using smaller cubes).
Then, I just add the concrete to the base using the cement and the mortar as needed.
All in all, it took about three hours to make all of the blocks.
I think that I covered most of the ground, but there were a few more steps I needed to take to get the building done.
If you’ve ever made a building before, you know that it’s much easier to fill a building with cement bricks than with concrete.
This makes building more fun, and I’m glad that I didn.
If you’ve got any questions about building, or just want to learn more about building materials, you should definitely check out my other posts